Does an ADAS Target stay in the vehicle after calibration?

No. An ADAS Target is a temporary reference tool. The technician removes it after the calibration procedure is complete.

Can a damaged target affect camera calibration?

Yes. A damaged or unclear target can make recognition harder. The technician should inspect the pattern and replace the target when its markings are unreliable.

Does every vehicle use the same ADAS Target?

No. Target design and placement depend on the vehicle’s camera system and calibration instructions. Some systems use a printed pattern, while others use a dedicated board.

Glossary

What Is an ADAS Target?

An ADAS Target is a marked reference pattern used during advanced driver assistance system calibration. The target gives a windshield-mounted camera a known visual point to recognize. A technician positions it at a specified location near the vehicle, then checks the camera’s view against that reference after windshield service.

Quick Facts About ADAS Target

Key Takeaways About ADAS Target

It is a reference pattern, not a replacement camera part.
Its position must match the calibration procedure.
It is often confused with a diagnostic scan tool.

How ADAS Target Works

A hand holds a black calibration chart with white circles and squares in a workshop setting

An ADAS Target presents a clear pattern that a vehicle camera can recognize. The technician places the target in a set position near the vehicle. The vehicle’s calibration system then reads the target and checks the camera’s view against the vehicle’s centerline.

Related glossary terms: Static Calibration, Dynamic Calibration, Camera Bracket.

Target placement depends on the vehicle, camera design, and calibration method. A static calibration uses the target while the vehicle remains in place. The technician may also use a scan tool to confirm the camera’s stored settings. The target does not adjust the camera by itself. It supplies the visual reference needed during the setup.

A man shows a checkerboard ADAS target sign to a woman beside a car outdoors

From the WindshieldRepairKirklandwa.com team

When we handle windshield-mounted ADAS camera calibration, we inspect the target area and follow the vehicle’s required setup. We place the target carefully, check its alignment, and review the calibration result with the vehicle’s system. A clean windshield and an accurate target position help prevent setup errors.

ADAS Target in Practice: A Real-World Example

A vehicle needs windshield replacement, and its forward-facing camera is mounted near the glass. During windshield-mounted ADAS camera calibration, we position an ADAS Target in front of the vehicle so the camera can recognize the reference and complete the required setup.